Uninterruptible Power Supply (UPS) Systems
※注意事項:
1.需透過LINE購物前往並在同一瀏覽器於24小時內結帳才享有回饋,點數將於廠商出貨後,隔天起算之90個日曆天陸續確認發送。
2.國際商家之商品金額及回饋點數依據將以商品未稅價格為準。
3.國際商家之商品金額可能受匯率影響而有微幅差異。
4.若於商家App下單,不符合LINE購物導購資格。商品描述
The power supply systems must provide maximum reliability and power quality while its costs are to be minimized. These requirements present a major design, operation, and maintenance challenges due to the dilemma between supply improvements and the associated investments. Therefore, the design, operation, and maintenance of power supply systems are usually a compromise between the reliability and quality of supply from one side and the required investments from the other side. The main impacts of power interruptions and low power quality are the costs and safety associated with them. Therefore, electrical loads are classified according to the impacts of interrupting their power supply; loads are classified to non-essential, essential, and critical. The impact of power interruptions on non-essential loads are minor while interruptions have a significant impact on the essential loads, especially if the interruption duration is above a specific threshold value. Critical loads are a class of the loads that should not be interrupted under any circumstances. The hazards, and costs associated with interrupting critical loads are usually intolerable even if the interruption duration is very small. For essential and critical loads an alternative safe supply must be available for providing the required reliability and power quality levels. The Uninterruptible Power Supply (UPS) is a main tool for providing safe power supply for these load classes. UPSs have many designs, operation, and control algorithms. The main differences UPS categories are the power capacity, switching time, safe duration, maintenance requirements, available system monitoring, self-diagnosis, and costs. For safe durations from minutes to - for example - an hour, static UPSs are the ideal safe supply alternative while in longer duration electromechanical UPSs provide an economically feasible alternative supply. According to the load requirements and interruption statistics, a justified mix of static and electromechanical UPSs may be chosen for providing an optimal alternative supply. In all cases, the flexibility allowed to deviate from perfect reliability and power quality should be used to allow designing cheaper and simpler alternative supply systems; however, this flexibility should not be wasted by permitting poor maintenance and operating procedures to compromise the reliability and quality. There are often cases that the alternative supply systems are not well selected, or incorrectly installed, operated, maintained. In other cases, they do not work properly when needed and this failure caused losses in term of time, money, and safety. Therefore, this training course provides and in-depth analysis of supply requirements for various load classes. In addition, the course surveys various options for providing an adequate supply system considering the design of the power distribution systems up to UPSs. Choice and design of system designs and UPSs are carefully covered within the course. Operation, maintenance, and troubleshooting of various supply alternatives are also considered in this course and typical case studies and simulations are presented.